Go to ...

The Times of Texas

RSS Feed

December 18, 2017

Answers to Common Questions about Laser Engraving


Laser engraving is a satisfying, rewarding, and profitable business. However, there are several factors to consider when laser engraving like the materials, timing, graphics, quality, and expense of any given project.

The Most Commonly Asked Questions

How can I make laser engraving on solid hardwood better?

Stain masking the hardwood will help to reduce the residue seepage that can get into engraved areas. It also helps with project cleanup.Use the bottom up engraving method. Another way to improve hardwood laser engraving is to use this method of laser engraving, which involves engraving from the top down. This also helps reduce the debris and smoke levels that come from engraving wood.

Use the bottom up engraving method. Another way to improve hardwood laser engraving is to use this method of laser engraving, which involves engraving from the top down. This also helps reduce the debris and smoke levels that come from engraving wood.

I want to engrave on leather. What’s the level of difficulty?

The leather is a wonderful engraving material that comes out beautiful. It’s not any more difficult than engraving wood.

I feel nervous about engraving glass. What recommendations do you have to help me?

The first thing to realize is that not all glass is the same. Don’t think that more expensive glass is better for engraving because that’s not how glass laser engraving works. Dollar store glass will engrave just as well as high-end glassware.

To get a nice, finished and frosty engraved glass finish:

Use a lower resolution to about 300 DPI to generate the best results on glass.
Polish the engraving area with a ScotchBrite pad, or something similar, to eliminate glass shards.
Some engravers put a wet, thin sheet of newspaper or a paper towel on the engraving area to aid in heat dissipation and to enhance laser engraving. Make sure to cut the paper a little larger than the engraving area and ensure there are no wrinkles before engraving.
Use 80 percent black to create a higher quality engraving.
Apply a thin coat of any liquid dish soap with your finger or a paper towel to the area you’re engraving. It helps dissipate the heat.
You can get a smoother finish if you use the Jarvis dithering pattern in your driver.

What can I do with leftover material scraps?

Scraps are a normal part of laser engraving. Some creative laser engravers have created more products with scraps to reduce their waste and to make unique, one-of-a-kind items to sell. For instance, you can use scraps of wood to engrave images or make small ornaments, name tags, or even signage.

Would expand my laser engraving business to include clothing, can I increase my revenue?

You can absolutely increase your profits with clothing in this industry. As long as you have a laser engraving system that can etch and/or cut on fabric, you can definitely expand your business. Aprons, fleece jackets, and leather jackets are commonly used items for laser engraving.

This simply addresses a few of the most commonly asked questions regarding laser engraving. If you operate a laser engraving business or are thinking about starting a business, these queries should have some benefit for you. Asking questions about laser engraving can only enhance your business and help you produce top-quality items.

Article by Needham Coding

www.needham-coding.com

 

Tags: ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*

code

More Stories From Business

About The Times of Texas